Current Status
Not Enrolled
Price
€55,00
Get Started
Course
Materials

Fig 1 - Ply Material Call Out Technique-min
This Composite drafting standard theoretical course will take approximately one hour and a half to complete.

The actual time of finishing this course can be less when your actual knowledge is up to date.  Find a nice quiet place to focus!
Your progress is saved. Feel free to break up your learning experience into sessions.
When you come back, you can pick up right where you left off!

Who should take this Composite Drafting Standard course?

Composite Repair technician, Composite inspectors, Mechanics, Composite certifying staff
If you need information, please contact us
Corporate solution: If you have more than 10 participants to enrol as a company, contact us by filling in the corporate contact form. Click this link.

What will you learn and know?

You will learn the basic O.E.M. (Boeing) Composite part ply layup drawing standards as used Boeing type aircraft type drawings/bleuprints

Why should you take this course?

After this e-learning course, you will have a good overview of how standard drawing notations of a Part are noted which gives you an advantage in your career!

Benefits of enrolling on this course

Enrolling and finishing every course and finishing it ultimately, you will earn points. With these points earned, adding them up, you can register for paid classes if you collected enough points you can enrol on a course for FREE.

Learning Method

Online e-learning by text
You can follow this course at your pace, where ever you are at any time.

Language of course and quiz:

Technical British and American English

Group Size

Unlimited size for this knowledge quiz
Corporate solution: If you have more than 10 participants to enrol as a company, contact us by filling in the corporate contact form. Click this link!

Examination/Final Outcome

After this online short e-learning course, you find an interactive quiz,
The examination is a three-question answer multiple-choice quiz.
The average pass rate for an examination is  75%,

  1. Revision Notice
  2. INTRODUCTION
    1. Purpose
    2. Scope
    3. Definitions
  3. COMPOSITE PARTNAME, PART OR INDENTIFINGNUBER ASSIGNMENT AND CHANGE
    1. Part name
    2. Part or Identifying number
    3. Part or Identifying change
  4. PARTS LIST
    1. Part list Entries
  5. DRAWING REQUIREMENTS
    1. Drawing Tolerance Block
    2. Main Views
    3. Dimensioning
    4. Engineering-Tooling Coordinated Surface
    5. Tool Side Surface Designation
    6. Honeycomb Ribbon Direction
    7. Flat patterns
  6. PLY DEFINITION CRITERIA
    1. Ply Numbering
    2. Ply Number Change
    3. Ply Size and Location
    4. Ply Orientation
    5. Universal Ply Orientation Symbol
    6. Ply Stack-up Section Views
    7. PlyCallout Legend
  7. PLY TABLE
    1. Ply Table Format and Entries
    2. Ply Table Location
  8. OPPOSITE PARTS
    1. Opposite Basic Part Categories
    2. Opposite Parts Using Opposites Views
    3. Opposites Parts Using a Common View
  9. DRAWING VIEW EXAMPLES
    1. Laminate Drawing View
    2. Co-bond Drawing View
    3. Secondary Bond View
    4. Co cure Drawing View
    5. Honeycomb Drawing View
    6. Flatness Control
  10. SHORTHAND CODES – LAYOUTS AND TEST DRAWINGS ONLY
    1. Stack-up Shorthand Code Usage
    2. Ply Orientation and Stackup Shorthand Code
    3. Reference Data Shorthand Code and Table
  11. SUPLEMENTAL INFORMATION
    1. Key Words
  12. EXERCISE QUESTIONS

Minimum Requirements for this online e-learning course:

Internet access;
Able to read technical English language.
notebook and ballpoint in case you want to make notes
Not required but useful: In-ear plugs or headset

Spread the love